Main Menu

Delete

Started by fulltone1989, December 12, 2010, 03:34:36 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fulltone1989

December 12, 2010, 03:34:36 PM Last Edit: January 12, 2011, 03:51:04 PM by tomasmaclennan
Sold
Guitars: Gibson ES-339 and LP studio w/ grovers and WCR Fillmores. Simon and Patrick Showcase Rosewood CW, PRS SE Semi Hollow w/ mods, modded Ibanez MC300NT
Amps: Groove Tubes Soul-O 45, Fuchs ODS 50 mod - EVM12L, Emi RW&B, and Weber Cali cabs
Ardx20 w/ Amaze0 in the loop.

sour d

#1
December 12, 2010, 03:53:29 PM
It looks like the TB switch is mounted on the plastic side cover not the metal part of the housing. Is it sturdy? does the input level still work with the mod?
Phiga bolt or Resurrection phishy hollowbody>bc rich emp 45 5 loop switcher. LOOP1: Emma discumbobulator>RMC joe walsh wah>'82 ts9>silver mod od9>ross compressor. LOOP2: add mid '80's proco rat LOOP3: add whammyII> digitech ex7. LOOP4: add microverb X2> dm2000> boomerang> digitech JML2. LOOP5: guitar into amp. '76 fender twin or a '64 fender deluxe

fulltone1989

#2
December 12, 2010, 05:54:23 PM
Yes it still works fine when I tested it. The mod's been installed for about 3 years and it is sturdy.
Guitars: Gibson ES-339 and LP studio w/ grovers and WCR Fillmores. Simon and Patrick Showcase Rosewood CW, PRS SE Semi Hollow w/ mods, modded Ibanez MC300NT
Amps: Groove Tubes Soul-O 45, Fuchs ODS 50 mod - EVM12L, Emi RW&B, and Weber Cali cabs
Ardx20 w/ Amaze0 in the loop.
Print
Go Up Pages1
User actions