Screamer Porn

[fulltone1989]

Seems like a solid choice, from what I can remember the ISO bar is the same width as the Furman and would work a-ok

[Heady Jam Fan]

Sweet, I have a little extra space if need be.

FWIW I tried today with only one pedal on one of the eight spots on the furman and two using wall-warts on the Furman, which should be isolated. Didn't change the background buzz though.

[fulltone1989]

Sweet, I have a little extra space if need be.

FWIW I tried today with only one pedal on one of the eight spots on the furman and two using wall-warts on the Furman, which should be isolated. Didn't change the background buzz though.

Hrmm, it could be that one power out being active that is causing noise?

[Heady Jam Fan]

Yea, I have no idea. The Isobar is cheap enough its worth trying I think - worst comes to worst, I have another surge protector that I think my roommates and I could use.

[Happyorange27]

Honestly my so called crappy SKB-25 does Not get noisy but I haven't compared that to anything. As mentioned I just ordered the Isobar 8. I'll report any improvement.

I bet you wall outlet can make a huge difference. If you have a good source like mine, you don't have to have such a filter. But then I go to a shot bar gig with no true ground which is tube and knob wiring and I'm screwed!

[Heady Jam Fan]

Yea, I live in an older area in Pittsburgh, the houses are kinda only kept up enough to rent and I share the house with 4 apartments. My Tripp Lite voltage regulator / conditioner has only told me there were power issues a few times (when I think to look at it), but I suspect my power is one of the issues with noise - when I bought the Mesa at GC, I had nearly no noise at all and I was running off my Furman.